-
Panel, 4FT, 32-Port, 65°, XPOL, (4x) 696-960 | (6x) 1695-2700 | (6x) 3300-4200 MHz, Fixed Tilt
-
Canister, 2FT, 20-Port, Omni Pattern, XPOL, (2x) 696-960 | (4x) 1695-2700 | (4x) 3300-4200 MHz, Fixed Tilt
-
Hybrid couplers are uniquely designed to separate input power equally among several outputs.
-
Power splitters split the signal evenly and with minimal loss and reflections.
-
Amphenol’s DAS 2, 3 and 4-way splitters ditribute lower power wireless signals evenly throughout a DAS network.
-
RF Attenuators reduce the amplitude level of an incoming signal.
-
Directional couplers are commonly used as power combiners, both to divide and combine signals.
-
Amphenol’s low VSWR terminators, or termination loads, shut off an open RF port.
-
Tappers are designed to tap off a portion of the antenna’s signal while allowing the rest of the signal to pass through with minimum loss.
-
Low PIM assemblies are available in virtually any required connector configuration and length.
-
DC Stops and DC Blocks are designed to block the flow of DC frequencies to RF signals.
-
Designed for outdoor applications under extreme conditions with high flexibility and small bending diameters. Available in a variety of cable lengths and connector combinations.
