8-Port, Panel, 65°, (2x) 698-960| (2x) 1427-2690 MHz, 1945 mm
10-Port, Panel, 65°, (1x) 698-803 | (1x) 880-960 | (1x) 698-960 | (2x) 1427-2690 MHz, 2683 mm
6-Port, Panel, 65°, (1x) 698-803| (1x) 880-960| (1x) 698-960 MHz, 2683 mm
Hybrid couplers are uniquely designed to separate input power equally among several outputs.
Power splitters split the signal evenly and with minimal loss and reflections.
Amphenol’s DAS 2, 3 and 4-way splitters ditribute lower power wireless signals evenly throughout a DAS network.
RF Attenuators reduce the amplitude level of an incoming signal.
Directional couplers are commonly used as power combiners, both to divide and combine signals.
Amphenol’s low VSWR terminators, or termination loads, shut off an open RF port.
Tappers are designed to tap off a portion of the antenna’s signal while allowing the rest of the signal to pass through with minimum loss.
Low PIM assemblies are available in virtually any required connector configuration and length.
DC Stops and DC Blocks are designed to block the flow of DC frequencies to RF signals.